MOTORISED PLEATED & HONEYCOMB BLINDS

Select the motor type for Pleated & Honeycomb Blinds that you would like below, choose from either Battery Powered or Hardwired. Click on the image of the motor you require for technical information and limits.

MOTORISED PLEATED & HONEYCOMB BLINDS

Battery Powered

Tilt & Lift 25 WF RTS (12 Volt)

Information

Measurements

Headrail	Min. Width	Max. Width	Max. Drop	Notes/Extra Information
27mm x 36mm	413mm	1500mm	2000mm	N/A
27mm x 36mm	483mm	1500mm	2500mm	If longer drop required

Power Supplies

Power Supply	Chargers	Notes/Extra Information
External single reloadable Lithium battery wand. 8 x AA	N/A	N/A
External dual reloadable Lithium battery wand. 16 x AA (required if drop is over 1.6m	N/A	N/A
External single rechargeable battery wand. 10 x AA	A/C Charger	N/A
External Dual Rechargeable battery wand. 20 x AA (required if drop over 1.6m)	A/C Charger	N/A
External rechargeable Li-Ion battery pack	Li-Ion Charger	N/A

Extras

Wire Free Solar pack (10 x AA)
2.4m extension cable for Li-Ion charger

Handsets

Hardwired

LW 25 B83 (24 Volt)

Information

Measurements

Headrail	Min. Width	Max. Width	Max. Drop	Notes/Extra Information
27mm x 36mm	663mm	1500mm	2000mm	Internal receiver
27mm x 36mm	753mm	1500mm	4000mm	Internal receiver longer drop required
27mm x 36mm	563mm	1500mm	2000mm	External Receiver
27mm x 36mm	653mm	1500mm	4000mm	External Receiver longer drop required

Power Supplies

Power Supply	Chargers	Notes/Extra Information
1.5 DC power supply	N/A	Supports up to 2 blinds
2.7 DC power supply	N/A	Supports up to 4 blinds
4.5 DC power supply	N/A	Supports up to 7 blinds
DC RTS receiver	N/A	This is an externally mounted receiver which operate up to 2 blinds (will require 1 per blind if you wish blinds to operate individually).
Integrated DC RTS	N/A	This is an internally mounted receiver which can operate up to 2 blinds (will require 1 per blind if you wish blinds to operate individually).